The soldering iron can be an indispensable tool for a number of different projects, ranging from home improvement and electronics repair to metalwork and even arts and crafts! Although since this tool is definitely a delicate, highly specialized device, it’s important to take good care of it – and that’s especially true of the end, the iron’s most delicate (and essential) part. To be able to properly care for the suggestion of your iron, keep the following pointers in mind: shop for the top rated soldering irons
Don’t file, smash or otherwise attempt to reshape the tip because it can permanently affect it. Instead, buy a different size or form that is better best suited to the needs you have. Most manufacturers offer an array of soldering flat iron tip sizes for specifically this purpose.
Always use fresh solder over a the tip to clean it before you learn to use it. This method is called tinning, and works because the fresh solder will assist pass any residual oxide protecting.
When soldering at specifically high temperatures (anything above 665 degrees Fahrenheit), or when you pause your soldering work for much longer than an hour, always clean and tin the tip in order to avoid oxidizing the solder.
Clean your tip with a synthetic wet cloth or sponge only; do not use cloths, rags or other fabrics. The sponge should be wet with unadulterated water, since the nutrients within tap water can contaminate your tip.
Avoid rub the end of your soldering iron on the metals you’re making an attempt to join.
Don’t add solder directly to the tip itself when hooking up wires. Rather, heat the connecting wires so when the solder is applied it melts into place.
Use the lowest heat possible for the job in question. This will help prolong living of your soldering iron idea.
When finished with your iron, don’t remove the excess solder from the tip prior to turning it off. This solder will actually prevent oxidation process and protect the fragile tip.
Finally, always allow the tip of your soldering iron to cool completely before putting it away in a specially designated case or holder.